Advertisement
Quick Freeze Icon:
Under the "Quick Freeze" mode, press and hold the "Freezer Temperature Adjustment" button for 3 seconds to adjust the
"Quick Freeze" mode duration; it can range between 6-24 hours.
Lock/Unlock Button:
If buttons have not been pressed for 30 seconds, it will go into lock state automatically.
Under the unlocked state, press the Lock / Unlock button for 3 seconds; the control panel will be disabled and a lock icon
will be lighted.
Under the locked state, press the Lock / Unlock button for 3 seconds; the control panel will activate and the lock icon will be
extinguished.
V. Fault Handling
1. Fault Codes
Refrigerator temperature display flashes "E1"
Freezer temperature display flashes "E2"
Freezer temperature display flashes "E9"
Freezer temperature display flashes "E6"
2. Common Faults and Maintenance
Common Faults
Refrigerator is not cooling
Refrigerator compartment is
Fault Code Display
Possible Reason
Compressor is not working / cannot
start up.
Compressor frequent tripping
Fault Code Description
Refrigerator temperature sensor failure
Freezer temperature sensor failure
Defrost sensor failure
Communication Failure
Troubleshooting
Check if:
- the PTC starter relay is damaged
- the voltage input to the control board
is normal;
Check if:
- the overload protection device is
damaged
- the compressor running current is
normal, if the current is too low, check
the refrigerant leaks.
Check every connection of PCB, make
sure that there are no loose
Advertisement
