The illustration is for explanation only, it may vary slightly from the actual product. As our products are continuous improved, there is no future notice if there is any change. Lamp Lamp Dairy Compartment Wine Glass Rack Shelf Glass Shelf Folding Rack Backlight...
Transportation and Placement of the fridge 1. Temperature Zone Transportation ● ● With refrigerator & freezer compartment to satisfy various needs of food store. Do not turn over, put across, extrude or shock the fridge, the angle of bank cannot over 45 degree. ●...
Ensure the fridge is placed steadily and correctly and all safety instructions Freezer Refrigerator Quick Speed Compartment Compartment Freeze Lock Cooling are understood. Temperature Temperature Icon Icon Icon 1. Plug in Power It will automatically enter into factory setting state once it was plugged in, besides, you can adjust the temperature in each compartment.
● Refrigerator Temperature Setting Quick freeze mode Under the unlock sate, press Refrigerator temperature adjustment button (button B) to set temperature Press mode button (button c), until quick freeze icon (icon 3) flickering, quick freeze mode will take effect from 2 to 8℃. seconds later.
Fingerprint are easy to be left on the faceplate, it can be wiped by dry towel. Please don’t repair without Please use standard power socket Clean the dust at the back of the fridge and on the ground at regularly. authorization, and choose above 10A, and the socket should the manufacturer appointed...
Model No 7S21FNN SL 7S21FNI SL Total Storage Volume(L) Freezer Storage Volume(L) Refrigerator Storage Volume(L) Climate Type Protection Against Electric Shock Fridge dose not work Star Level Mark Refrigerating Mode Air Cooling Air Cooling Rated Voltage/Frequency 220V~60Hz 220-240V~50/60Hz Rated Current(A) ·...
Foods that freeze too slowly may be spoil. Model 7S21FNN SL 7S21FNI SL Be sure to wrap foods properly,and wipe containers dry before placing them in the appliance.This cuts down on frost build-up inside the appliance.
Handle Installation Instructions Decorative Retaining Bar Installation Instructions Decorative Screw Retaining Bar Screw Cap 1. First, take the decorative retaining bar out from refrigerator, use cross recessed screwdriver to set the screw on the bottom beam. Fix it tight with all the screw thread twisted through the hole. 2.