NOCRY NRT-128AC Instruction Manual page 16

1 ROTARY TOOL STAND
The stand is used to hold the rotary tool up for
maximum mobility when using the flexible
driver. If you can't immediately recognize it,
know that it consists of a table clamp and an
adjustable height rod, and comes disassembled
in the box - find our tips on setting it up on page
36.
1 PRECISION HANDLE SET
This is the key to doing any sort of precision
work with your rotary tool - it redistributes the
weight of the tool to your palm for improved
balance, which is oh-so important for those
precision projects. When looking for it in the
box, keep in mind that the set consists of the
precision handle and the narrow housing cap.
Find tips on attaching and using it on page 36.
1 CUTTING SET
The cutting guide with adjustable depth and the
3 drill bits together allow for a sturdy and
controlled cut with maximum visibility. Look for
the set-up instructions on page 37, and speed &
material recommendations - on page 25.
Pro tip: The drill bits can also be used
independently from the cutting guide, to help
you get the most from the kit.
15