Sinclair SDV5 Series User Manual page 10

●
When cooling
Adjust the louver horizontally. (Refer to Fig.4-13)
●
When heating
Adjust the louver downward (vertically). (Refer to Fig.4-14)
Fig.4-13
CAUTION
Do not try to adjust the louver by hand, as doing so may
cause a malfunction.
■
Adjust the air direction left and right
To change the air direction to the left or right, adjust the left and
right louvers to appropriate positions.
■
Air flow selection
Open the front panel.
(How to open the front panel: refer to Fig.5-6).
CAUTION
Before opening the front panel, cut off power supply and
turn the breaker to OFF.
Do not touch the metal parts inside the indoor unit to avoid
injury.
Select the air flow as desired.
When setting the air flow selection switch to
the air conditioner automatically decides the appropriate
blowing pattern depending on the operating mode/
scenario.
Fig.4-14
Fig.4-15
,
8
Table 4-1
Operating
cooling mode
mode
When the room At the start
is cool or after of the
running the air operation
Situation
conditioner for or at other
one hour. times when
the room is
not fully cooled.
Air is blown via
the upper air
outlet to equalize
the room
Blowing
temperature, so
pattern
the air doesn't
directly blow
onto people.
When setting the air outlet selection switch to
In all modes, air is expelled from the upper air outlet.
Use this switch if you do not want air coming out of the
lower air outlet (when sleeping).
CAUTION
To switch between Auto and Manual mode on the lower air
outlet, turn off the unit and restart it to reset the modes.
heating mode
At times other than those At the start or
below. (Normal time.) when air
temperature is
low.
Air is blown from the
Air is blown via
upper and lower air
the upper air
outlets for outlet, so it
high-speed cooling doesn't directly
in cooling mode and
blow onto
for warming the air
people.
in heating mode.
.