Table of Contents
Advertisement
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
5.Different Dimensions Detect Function
IR(infra-ed) detection function
*Available for the model with UV&MG&IR detection,
<Used to check most of banknote which contains UV&MG&IR features.>
---When the machine stop and sound after detecting a counterfeit note, the display will show the message" db "and the IR indicator
will blink (alerting the user the presence of a dubious bill), the dubious bill will always be the last one on the stacker. remove the
detected note from the Stacker and recount all the other notes in the Stacker.
---The sensitivity of IR detection can be adjusted. Press"IR"button for 3 seconds, The batch display will show the current sensitivity
level"rXX"then press numeric Key to choose the desired sensitivity level (range from 0-9).
After choosing of the level, press "RESTART" button to confirm.
Double-notes detection function
<Used to check all kinds of banknotes with double notes problem.>
---By default, serving as a supplementary function, this detection can be activated when the units is powered up.---When the machine
stop and the alarm sound after detecting a double-note bill,the display will show the message"Ed"(alerting the user the presence
of a double-note bill).The double-note bill will always be the last one on the stacker. remove the detected note from the Stacker
and press"RESTART"button to continue.
09
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
5.Different Dimensions Detect Function
Half-note detection function
<Used to check half-note of all the banknotes.>
---By default, serving as a supplementary function, this detection can be activated when the units is powered up.
---When the machine stop and the alarm sound after detecting a half- note bill, the display will show the message"EH"and the (alerting the
user the presence of a half-note bill). the half-note bill will always be the last one on the stacker. remove the detected note from the
Stacker and recount all the other notes in the Stacker, press" RESTART"button to continue.
Chained-note detection function
<Used to check chained-note of all banknotes.>
---By default, serving as a supplementary function, this detection can be activated when the units is powered up.
---When the machine stop and alarm sound after detecting a half- note bill, the display will show the message"EC"and the (alerting the user
the presence of a half-note bill). the chained-note will always be the last one on the stacker. remove the detected note from the Stacker
and recount all the other notes in the stacker, press" RESTART"button to continue.
< NOTE >
The following are applicable to all the counterfeit note detection function.
10
Advertisement
Table of Contents
