Different Denomination Detection Function; High Quality And Leading Article In The - Pyle PRMC820 User Manual

HIGH QUALITY AND LEADING ARTICLE IN THE

BILL COUNTER
4.how to Operate Machine
4).Set the counting speed.
Set the counting speed by pressing the SPEED Key. Every time this key is pressed, one of the preset rates "600","1000", "1200","1900"
notes/min will be displayed by rotation on the Counting Number Display.
5).Set a loose of bank notes to be counted in the Hopper.
Set notes to be counted in the Hopper and the machine will start counting automatically.
If a batch number has been set, the machine will stop when the batch number is reached. After the batched notes are removed from the
stacker, the next counting operation will start automatically.
For reference
How to change batch number for each counting: press the RESTART KEY each time when batch number is changed for each batch counting.
What is the "ADD function" ,When counting operation for a loose of notes placed in the Hopper is finished, the counting operation for the
next bundle of notes will be started from"0"on the Counting Number Display. When counting operation is started in the ADD function, the
counted numbers for succeeding bundle of notes will be added and displayed.
05
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER

5.Different Denomination Detection Function

Through this function the size of the first counted note is memorized and if a note whose size is different from the memorized value is
detected, the machine will stop.. Setting of DD detect function.
1.Press the DD key to set the "DD detection function"(DD lamp will be lit.)
< NOTE >
Difference between note sizes of different dimensions is detected by checking the width of each note to be counted. The machine is
set up so that it can detect notes of different dimensions when the size different is 5mm or more.
The size of dimensions can be adjusted. Press the "DD"Button for 3 seconds, the batch display will show the current size"DXX" then
press the numeric Key to choose the desired size,(rang from 0-9). After choosing of the size, press "RESTART"button to confirm.
2.When the machine stop after detecting a different
RESTART KEY to restart counting.
Clearing the memory of a dimensions
* In case the Addition Lamp is not lit!
Remove the notes from the Stacker. The memorized value will be cleared when the number on the Counting number Display become"0"
* In case the Addition Lamp is lit!
Removed the notes from the Hoper and Stacker, and the press the"RESTART"KEY; memory will be cleared with the indication on the
counting Number Display at"0".
dimensions note,remove the detected one from the Stacker and press the
06