Table of Contents
Advertisement
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
2.Operation Panel and Display
8. BATCH KEY
Every time this key is pressed, one of the preset batch amounts 10,
20,25,50,100 and infinity will be displayed and selected by rotation on
the Batch Number Display.
9. AUTO KEY
Press CF key, then press this key.
Manual or Automatic Switching
counting funtion.
10. ADD KEY
Press CF key, then press this key.
Number of Accumulative funtion
11. SPEED KEY
Counting speed is selected .(1900,1200,1000,600 notes/min.)
12. COUNTED NUMBER DISPLAY
The number of counted notes is displayed here.
13. BATCH NUMBER DISPLAY
The optioned number of notes to be batched is display here.
03
3.Notes in Using Machine
To make the most use of this machine
---Avoid operation under direct sunlight.
---Don't press the operation-keys with a pointed tip of pencil or anything
pointed.
---Don't make multi wiring from one socket.
To use this machine safely;
---Three-prong plug which can be grounded to the building ground should
be used for power supply.
---Use the power cable attached to the machine as accessories.
---Unplug the machine before it is moved.
---Don't place tools, fingers ,hair, loose clothing, etc.near any moving part.
---Don't spill drink etc. on the machine.
---For maintenance, use specified parts;don't make improper maintenance.
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
4.how to Operate Machine
Counting Bank Notes
1).switch on the machine.
"0"will be display on the Counted Number Display.
When the lamp of the machine is set to the AUTO position, a proper threshold is set automatically.
< NOTE >
When dirty notes are mixed, do not use the AUTO positionas there is a possibility that the detection function does not work correctly.
Put set notes at the centre of the Hopper. If they arelaterally shifted to the right or left greatly, there is possibility thatcorrect detection
can not be assured.
2).Check the Addition Lamp and activate the ADD function
To add counted number one after another, press the ADD Key to activate the ADD function making the addition lamp lit.
3).Set the optional batch number.
Set the batch number by pressing the BATCH Key. Every time this is pressed, one of the preset values 10,20,25,50,100 or infinity will be
displayed by rotation on the Batch Number Display.
Counting operation will stop when the counting number reaches the set batch number. Any optional batch number (1-999) other than the
preset values can be set by pressing the Ten Keys Pad.
04
Advertisement
Table of Contents
