Honda Accord 2008 Body Repair Manual page 23

Main Menu
NOTE:
The parts marked with numbers are sold as repair parts.
●
The parts marked with letters are not sold separately and are shown only for reference.
●
［ ］: Thickness unit: mm (in.)
●
High-tension steel sheet: Tensioner strength 340 to 590 MPa.
●
No.
ꐀ Roof Panel ［0.7 (0.028)］
ꐁ Side Sill Outer Panel ［0.75 (0.03)］
ꐂ Front Side Outer Panel Set ［0.75 (0.03)］
ꐃ Rear Side Outer Panel Set ［0.75 (0.03)］
ꐄ
Front Pillar Stiffener Comp.
Front Pillar Upper Stiffener ［1.0 (0.04)］
a:
Roof Side Stiffener ［1.8 (0.07)］
b:
ꐅ
Center Pillar Stiffener Comp.
Center Pillar Lower Stiffener ［1.0 (0.04)］
a:
Center Pillar Upper Stiffener ［2.0 (0.08)］
b:
ꐆ
Side Sill Reinforcement Comp.
Side Sill Reinforcement ［1.6 (0.06)］
a:
Bulkhead (Front and Rear) ［1.2 (0.05)］
b:
ꐇ Front Pillar Lower Stiffener ［1.0 (0.04)］
ꐈ
Rear Gutter Comp.
Rear Gutter Upper ［0.6 (0.02)］
a:
Rear Combination Adapter/Rear Gutter Lower ［0.6 (0.02)］
b:
ꐉ
Front Inner Pillar Set
Front Inner Upper Pillar ［1.8 (0.07)］
a:
Roof Side Rail ［1.6 (0.06)］
b:
Front Pillar Inner Upper Extension ［2.0 (0.08)］
c:
Front Inner Lower pillar ［1.2 (0.05)］
d:
Front Jack-up Bracket ［2.0 (0.08)］
e:
ꐊ
Rear Inner Panel Comp.
-1 Rear Inner Panel
-2 Rear Wheel Arch Extension Comp.
Rear Wheel Arch Extension ［0.6 (0.02)］
a:
Side Sill Reinforcement Rear Extension ［1.6 (0.06)］
b:
Rear Jack-up Bracket ［2.0 (0.08)］
c:
-3 Rear Wheelhouse ［0.8 (0.031)］/Damper Base ［2.3 (0.09)］
ꐋ
Door
Table of Contents
Part Name
Skin ［0.8 (0.031)］
Panel Front ［1.4 (0.06)］/Rear ［0.7 (0.028)］
Tensioner Zinc-plating
strength (MPa)
○
270
○
270
○
270
○
270
590
590
590
590
○
590
○
590
○
590
○
270
○
270
590
590
440
○
590
○
590
○
270
○
270
○
440
○
590
○
270
○
340
○
270
1-19