Pronteau Proboil.2 Manual page 3

13. Lid fits flush with
tank when fully
fitted.
16. Loosely rotate
temperature knob
until it drops then
press down.
19. Plug the boiler in at
the mains.
22. Turn on water and
flush through at least
5 litres. Should any
taste persist repeat
steps 22 & 23.
14. Fully fasten tank lid ring
clockwise.
17. Push rubber hose (a) and
pipe (b) fully onto stems
as shown. Return unit to
former position.
20. Plug in, and turn power
on.
23. Wait 12 minutes for unit
to re-boil.
15. Lower lid & knob (d) and
styrene insulation (e).
18. Turn on until water runs
through spout, then fully
turn off.
21. Wait 20 minutes for unit
to boil (max 30 mins).
24. Re-calibrate temperature
knob if necessary. See
user manual for details,
or visit
www.proboil.co.uk