Activating Your Phone - Sony CM-SB200 Operating Instructions Manual

Activating Your Phone

First time activation
In order to make and receive calls, you need to establish telephone
service from a service provider. Many companies provide service.
Choose a service provider that will meet your calling needs.
Self-activating your phone
Some service providers have a service feature called OTASP (Over-The-
Air Service Provisioning) which allows you to self-activate your phone
with a new service. Your phone supports this service feature. Contact
your service provider to see if this service is available in your area.
1 From the Network menu, scroll and select Activation.
2 Scroll and select which system block to activate the
service on.
A display appears prompting you for confirmation. To go back one
step, press
CLR
display, press
END
3 Press to confirm.
1
The phone calls up a service provider. When a service provider is
contacted, a message appears and you are connected to an
operator. When activation is complete, a confirmation message
appears followed by the standby display.
If activation fails
A message appears advising you that activation failed. Push Jog Dial to
retry or press to return to the standby display.
END
SB200 04-11 prep
. To cancel activation and return to the standby
.
11
11
4/9/99, 2:21 PM