Belkin WIRELESS F8E849-BNDL User Manual page 14

Troubleshooting
1
___
• Make sure you have properly established
2
___
communication/ synchronization between
the receiver and the Mouse and Keyboard.
3
___
• If the Mouse is not working, make sure that the
LED on the Mouse starts flashing when you push
4
any of the Mouse buttons, or move the Mouse.
___
If the LED does not flash, check to make sure
5
5
you have installed the batteries correctly.
___
• When the Mouse LED is flashing, the LED
6
on the receiver should also flash to indicate
___
they are speaking to each other. If the LED on
7
the receiver does not flash, it means that the
devices have not connected properly. Repeat
step 4 to 7 of the quick installation guide.
• If your Mouse pointer becomes choppy on-
screen or the Keyboard does not register
keystrokes, replace batteries with a fresh set.
• If your Cursor is controlled by another system
in an office or multi-user environment,
try to unload the batteries, insert them
again after 2 minutes and repeat step 3 to
step 7 of the quick installation guide.
10