Connection Of External Equipment; Headphone Socket (Option) - LG MC-019E Owner's Manual

Connection of external equipment

You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on the
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
4. Select the programme number where the VCR channel is stored.
5. Press the PLAY button on the VCR.
Audio Video in/out sockets (option)
1. Connect the audio/video out sockets of the VCR to audio/video
2. If the VCR is connected to the AV sockets on the set, press the
3. Press the PLAY button on the VCR.
You can also record programmes received by the TV on
video tape via audio/video out sockets.
Note: a. If audio input is only L or R select L+L or R+R through
Euro scart socket (option)
1. Connect the Euro scart socket of the VCR to the Euro scart
2. Press the PLAY button on the VCR.
You can also record programmes received by the TV on video tape.
Component in sockets (option)
1. Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb
2. Connect the audio cable from the COMPONENT to AUDIO
3. Press the TV/AV button to select COMPONENT.
4. Press the PLAY button on the COMPONENT.

Headphone socket (option)

PR VIDEO AUDIO
In some models which have a headphone socket can perform this
AV
function.
Insert the headphone plug to the headphone socket of the set. You
can listen to the sound through the headphone. To adjust the
headphone volume, press the
If you press the MUTE button the sound from the headphone and
TV's speakers are switched Off.
back of the set.
the 'Manual programme tuning' section.
in sockets of the set and in sockets of the VCR to out sockets of
the set.
TV/AV button to select AV.
The VCR playback picture appears on the screen.
I/II/ key on remote control.
b. Front AV and rear AV not to be used simultaneously.
c. If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO (L/MONO) socket onthe back of the set.
socket of the set.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV mode automatically. But if you
want to keep on watching TV mode, press the
buttons.
Otherwise press the TV/AV button on the remote control
handset to select AV. The VCR playback picture a p p e a r s o n
the screen.
Pr or Y B-YR-Y) of the COMPONENT (480) to the
COMPONENT INPUT sockets ( Y PB PR ) on the set.
sockets of COMPONENT INPUT.
THE COMPONENT playback picture appears on the screen.
22
or NUMBER
button.
/