Connection Of External Equipment (Some Models) - LG 21FS4RK Owner's Manual

Connection of external equipment (some models)

You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Here shown may be somewhat different from your set.
These are an example drawing of typical jack layout.
Y
P
B
DVD INPUT (480i)
3
OUT
AV VIDEO (L/MONO) AUDIO(R)
1
IN
S-VIDEO
JACK
(some models)
1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select
2. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these
inputs. Press the TV/VIDEO button to select
3. OUT JACKS: Connect external equipment inputs (VCR, Audio amplifier) to these outputs for recording
or monitoring the selected program.
§/ EARPHONE JACK (some models) : In some models, this jack is located on the front or side of TV.
4.
Note: This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Connecting AUDIO/VIDEO IN Jacks
1. Connect the audio/video output jacks of the VCR to
IN 1(A/V) jacks on the side or back of TV.
If you connect the audio jack only, you can't hear the
sound from the TV.
2. Press the TV/VIDEO button to select
Note: In some stereo models, if you connect the
audio/video output jacks of the VCR to the IN 2
(A/V) jacks on the front or side of TV, select
VIDEO2 .
3. Press the PLAY button on the VCR.
The video playback is on the TV screen.
Note: In case of MONO VCR, connect the output jack of VCR to the AUDIO L/MONO IN jack of TV so
that the sound can be heard from both speakers. If you connect it to the AUDIO R IN jack of TV
the sound is heard only from right speaker.
P
R
COMPONENT
L
AUDIO
R
4
2
VIDEO1 .
21
2
4
EARPHONE S-VIDEO VIDEO
4 S-VIDEO
JACK
(some models)
VIDEO1 or VIDEO .
VIDEO2 or S-VIDEO .
OUT
AV VIDEO (L/MONO) AUDIO(R)
IN
< TV >
< Playback VCR >
S-VIDEO
JACK
(some
models)
2
4
AV IN2
L/MONO AUDIO R
2
< TV >