Operating; Charging The Speaker; Auto Wireless Charging; Charging With The Ac Adapter - LG PJ9 Owner's Manual

12

Operating

Charging the speaker

Auto wireless charging

Battery is automatically charging, when battery is
completely discharged (0 %).
1. Connect the speaker and woofer station.
Follow the "Setting up the woofer station" on
page 9-10.
2. When battery is completely discharged (0 %),
speaker turns off and descends automatically to
woofer station.
3. Speaker lands on woofer station.
3
4. Charging is started.
- The speaker' s Battery LED (Red) turns on.
,
Note
y If the speaker is on, it automatically levitates
after charging the battery (Approx. 90%).
y If you charge the battery manually by pressing
button, the speaker will not levitates
automatically even if charging is completed.
In this case, press
y If the speaker is overheating during charging,
it automatically levitate. And half of mood
LED light turn on.
y For charging battery, speaker should be
placed on the woofer station.
y To charge battery manually, press
on the top of woofer.
y When press
during charging, the speaker stops charging
and levitates.
button to levitate.
button
button on the top of woofer

Charging with the AC adapter

This speaker uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of the
speaker.
3. Plug the AC adapter into an AC outlet.
(Not supplied)
If the battery is fully charged in charging mode,
Battery LED is changed from red to green. After
15 seconds, Battery LED turns off.
>
Caution
y AC adapter is not supplied.
It is recommended that you use the 5 V
AC adapter approved by LG Electronics Inc.
(more than 1.8 A) with this unit because of
danger of explosion. If you do not use the
recommended adapter, charging is unavailable
or charging time may differ.
y When speaker is charging with AC adapter,
do not use levitating mode. (Page 14)