Operating; Charging The Speaker; Charging With The Ac Adapter; Checking The Charging Status - LG PM5 Owner's Manual

Charging the speaker

Charging with the AC adapter

This speaker uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to DC IN 5V port of the
speaker.
3. Plug the AC power cord into an AC outlet.
(Not supplied)
,
Note
y Operating time is approx. 18 hours. It is based
on what fully charged the battery, continuous
playback using 50 % volume level and turning
off mood light and Sound Effect functions.
It may vary depending on the battery status
and operational conditions.
y It is recommended that you use the supplied
USB cable for device protection.
>
Caution
AC adapter is not supplied. It is recommended
that you use the 5 V AC adapter approved by
LG Electronics Inc. (more than 2 A) with this
speaker because of danger of explosion. If you
do not use the recommended adapter, charging
is unavailable or charging time may differ.

Checking the charging status

When speaker's battery is charging, you can check
the charging status by Battery LED.
LED
Green Off Battery is fully charged.
Green Off
Battery is charging.
Red
Red
,
Note
y If you listen to the music while charging, it will
take longer to charge.
y When the speaker is not charging due to
overheating, The Battery LED turns on
red and amber alternately. And charging is
stopped.
y When the speaker' s battery is fully charged,
the Battery LED turns on green for 15
seconds and then off.

Operating

9
Description
2