Sony UP-TX1 Series Driver Manual page 7

5
Select [Search for a suitable driver for my device
(recommended)] and then click [Next].
The screen changes as follows.
6
Select [CD-ROM drives], and then insert the
supplied CD-ROM "PRINTER DRIVER &
INSTRUCTIONS FOR USE UP-TX1" into the
CD-ROM drive.
7
Click [Next].
The screen changes as follows.
8
Click [Next].
If the [Digital Signature Not Found] dialog box
appears, click [Yes].
The screen changes as follows.
9
Click [Finish].
10
Restart the computer.
This completes the installation of the printer driver.
Note
If you select [Cancel] in step 7 or [No] in step 8, the
[Found New Hardware Wizard] may not appear during
the next installation. In that case, perform the procedure
described in the section "If the [Found New Hardware
Wizard] does not appear" of step 3.
Windows 2000
7
Installing the Printer Driver