Fibre Channel Configuration; Scsi Configuration - Siemens PSFR-CP41 Installing, Starting Up And Maintaining

Configuring the PSFR-CP41

Fibre Channel Configuration

This option allows for setting the Fibre Channel Address method, hard address
value, and WWN overrides.
Current Fibre Channel Configuration:
World Wide Name High: 0x10000011
World Wide Name Low: 0x10000001
Use Hard ALPA: No
1) Change World Wide Name High
2) Change World Wide Name Low
3) Toggle Hard ALPA Usage
X) Return to previous menu
When configuring the Fibre Channel AL_PA, the PSFR-CP41 will present a list
of loop addresses along with the corresponding AL_PA. The user selects the
loop address desired.

SCSI Configuration

This option allows for setting the SCSI Initiator ID, enabling SCSI Target IDs,
and setting the SCSI bus reset behavior.
Current SCSI Configuration:
Initiator SCSI ID:
Target SCSI ID(s):
Reset SCSI Bus on Boot: Yes
1) Change Initiator SCSI ID
2) Add Target SCSI ID
3) Remove Target SCSI ID
4) Toggle SCSI Reset Operation
X) Return to previous menu
U42093-J-Z716-1-74
Fibre Channel Configuration Menu
Version: X.X XXXX
SCSI Configuration Menu
Version: X.X XXXX
7
Perform Configuration
Operating Manual