Garmin Rino 130 Owner's Manual And Reference Manual page 35

Trip Computer Page
The Trip Computer provides a variety of data fi elds
with read-outs of current information as you travel.
Seven small or two large fi elds display navigation
information and are user programmable. The default set-
tings for these fi elds are shown in the illustration.
The list of data fi eld choices may be found on page 18
and defi nitions may be found in Appendix F.
The Option Menu for this page provides the fol-
lowing options: Reset, Big Numbers, and Restore
Defaults.
To program a data fi eld:
1. Use the CLICK STICK to highlight the desired data
fi eld and then press it IN to open the data fi eld
Options Menu.
2. Use the CLICK STICK to move Up or Down the
menu to highlight a desired data option.
3. Press IN on the CLICK STICK to select the option
and place it in the data fi eld.
To access the page Options Menu:
1. Use the CLICK STICK to highlight the Options
Menu on-screen button and press it IN to display
the Options Menu.
2. Highlight the desired option and then press IN on
the CLICK STICK to activate.
3. To activate individual 'Reset' options, highlight
the item on the list and then press IN on the
CLICK STICK to place or remove the check mark.
4. Once you check all the desired items to clear, reset,
or delete, highlight 'Apply' and press IN on the
CLICK STICK. You may also choose the 'Select All' or
'Unselect All' options accordingly.
NOTE: Use care when choosing the 'Delete'
options, as all stored Tracks, Waypoints, and
Routes can be permanently deleted when reset-
ting the Trip Computer. Once deleted, items
cannot be recovered.
190-00284-00_Prelim_FCC.indd 25
Trip Computer Page
Options
Data Field Options Menu
Reset Options Menu.
Useful when starting a new
trip to clear old data.
25
9/18/2003, 3:51:03 PM