Introduction
Properties of the OSM TP62
Electrical ports
Optical ports
Maximum distance between two ESMs
Maximum ring span with 50 OSMs
Digital Inputs
Note
Industrial Ethernet OSM TP62 is available in two versions:
•
OSM TP62 with eight digital inputs:
The eight digital inputs are connected over two plug-in 6-pin terminal blocks on
the top of the device. To display the status of these inputs using the 8 device
LEDs, there is an additional display mode known as the "Input Status" that is
selected using a third mode LED.
•
OSM TP62 without digital inputs:
There are no digital inputs and the "Input Status" display mode is not available.
The operating states are displayed by 2 mode LEDs.
16
6 x 10/100 Mbps
autonegotiation/autocrossover ports
TP connectors (RJ-45 jacks)
2 x 100 Mbps FO ports (full duplex)
BFOC sockets
3000 m (multimode graded-index fiber)
150 km
8 x 24 V dc
Industrial Ethernet OSM/ESM
C79000-Z8976-C068-10