Table of Contents
Advertisement
Programming
Initial Setup:
• Download the DIG BTT app using the iOS
App Store, Google Play,
or the QR code on the box.
• Remove the battery cap from the timer and
insert two fresh, brand name,
AA alkaline batteries (not included). The
proper orientation is denoted on the
underside of the timer.
• Screw the battery cap back on until
hand tight.
Home Screen
Picture of
controller
whether
controller is
currently
runnning
or not
Schedule
Overview:
Shows current
program
run times.
Red lines
indicate that
there is an
overlapping
start time
Activate or
deactivate
the program
Run time
for valve
Home
(current page)
Programming:
• Open the DIG BTT app and allow it to
scan for nearby timers.
Note: Connection range is up to 50 feet
(15 meters) line of sight.
• The new timer will appear on screen as
the DIG 410BT.
Note: If installing multiple timers, wait until
each unit is renamed until inserting the batteries.
• Select the timer to connect to it. The
following diagrams show all functionality.
Any changes made automatically save and
update to the controller instantaneously.
Controller
Manual run
settings
3
Controller
name
Last run
information
Battery life
Connection
strength
Schedule
type
Schedule
settings
Up to 5
start times.
Select an
existing
start time to
edit/delete.
Red start
times are
overlapping
and will not
run
Advertisement
Table of Contents
