Siemens SITRANS P Brochure & Specs page 196

SITRANS P measuring instruments for pressure
Fitttings - Shut-off valves for gage and absolute pressure transmitters
Double shut-off valves
■
Overview
The double shut-off valves DN 5 are suitable for pressure gages
and pressure transmitters and available in 4 versions:
• Sleeve-collar
2
• Sleeve-sleeve
• Sleeve-nipple
• Collar-collar
■
Characteristic curves
Permissible operating pressure as a function of the permissible operating
temperature
Selection and Ordering data
Double shut-off valves DN 5
Material: X 6 CrNiMoTi 17 13 2 (mat. No.
1.4404/316L), max. permissible working
pressure 420 bar;
• Sleeve-sleeve
• Sleeve-nipple connection
• Sleeve-collar
• Collar-collar
Accessories
Factory test certificate EN 10204–2.2
Material acceptance test certificate
EN 10204-3.1
■
Dimensional drawings
Double shut-off valve DN 5 (sleeve-sleeve) 7MF9011-4DA, dimensions in
mm
2/196 Siemens FI 01 · 2009
© Siemens AG 2008
Double shut-off valve DN 5 (sleeve-nipple) 7MF9011-4EA, dimensions in
mm
Order No.
7MF9011-4DA
7MF9011-4EA
7MF9011-4FA
Double shut-off valve DN 5 (sleeve-collar) 7MF9011-4FA, dimensions in
7MF9011-4GA
mm
7MF9000-8AB
7MF9000-8AD
Double shut-off valve DN 5 (collar-collar) 7MF9011-4GA, dimensions in
mm
A
C
B
A Connection on device side : ½-14 NPT
B Connection on measurement side: ½-14 NPT
C Vent and test connection: ¼-18 NPT