Presetting Stations - Siemens HT-Q100 Instruction Manual

Presetting Stations

Example: Presetting FM 89.1 in the memory
Note
55
1
Press the TUNER button to
select the FM band.
4
Press to select
preset number.
•
You can select between 1 and 15 presets.
•
This unit does not receive AM broadcasts.
2
Press TUNING/CH to
select "89.10".
•
Refer to Step 2 on page 54 to automatically
or manually tune in to a station.
5
Press the TUNER MEMORY
button again.
•
Press the TUNER MEMORY button before
'number' disappears from the display.
•
'number' disappears from the display and the
station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
Press the TUNER
3
MEMORY button.
•
"1" flashes in the display.
6
To preset another station,
repeat steps 2 to 5.
on the
56
ENG