Setting The Language - Siemens HT-Q100 Instruction Manual

Setting the Language

OSD (On-Screen Display) language is set to English by default.
In Stop mode,
1
press MENU
button.
MOVE
Note
• To select another language, select OTHER and enter the language code of your country.
(See page 64 for language codes)
AUDIO, SUB TITLE and DISC MENU language can be selected.
MOVE SELECT
43
Press Cursor
2
ton to move to
'Setup' and then
press ENTER button.
ENTER EXIT MOVE ENTER
RETURN EXIT
but-
Select 'Language'
3
and then press
ENTER button
EXIT MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT
Selecting the
OSD Language
Press Cursor ,
4
button to select 'OSD
Language' and then
press ENTER button.
MOVE ENTER RETURN EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
MOVE ENTER RETURN EXIT MOVE ENTER RETURN EXIT
Selecting the Selecting the
Audio Language (record- Subtitle Language
ed on the disc) (recorded on the disc)
ENG
Press Cursor , but-
5
ton to select the desired
language and then press
ENTER button.
•
Once the setup is complete, the OSD will be
English if English has been selected as language.
MOVE SELECT RETURN EXIT
ENTER EXIT
MOVE RETURN
Selecting the Disc Menu
Language (recorded on the disc)
If the language you selected is
*
not recorded on the disc, menu
language will not change even
if you set it to your desired
language.
44