Before Connecting The Speakers - Siemens HT-Q100 Instruction Manual

Before Connecting the Speakers

Speaker Packages
Please confirm that all the following contents are included in the package.
Front Speaker (2EA)
Subwoofer Speaker
Front Stand (2EA)
Assembling the Speakers
Set the front speaker on the front stand.
To mount the speaker on the wall
Drive a screw into the wall for each speaker and
then hook the front speaker over them.
13
Speaker Accessories
Speaker Cable (3EA)
Hook the speakers so
that the screws are in the
position of the figure.
Front Speaker (R)
Subwoofer
Connecting the Speakers
1 Press down the terminal 2 Insert the black wire into the
tab on the back of the
black terminal (–) and the red
speaker.
wire into the red (+) terminal,
and then release the tab.
Black
or
Caution
• Do not let children play with or near the speakers.
They could get hurt if a speaker falls.
•
When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
Front Speaker (L)
3 Connect the connecting plugs to the back
of the Home Theater.
•
Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
Red
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the speak-
er. If this occurs, place the speaker away
from your TV set.
ENG
14