Software Configuration - Black Box RS-232 Series Manual

Pci express interface
Table of Contents

Advertisement

4.2 Software Configuration

The drivers that were installed during the Software Installation steps will automatically be used to configure the PCI
adapter. You should see one or more 'New Hardware Found' alerts indicating the actual COM port(s) are being created.
If you view your system's Device Manager, you should have a new COM port in the 'Ports (COM & LPT)' device class.
You can access your new COM port by using the assigned COM identifier, which will vary from system to system. At
this point, the hardware is recognized. To verify operation, use the supplied WinSSD diagnostic utility. WinSSD can be
found in Start All Programs SeaCOM WinSSD.
The following instructions are applicable to the Windows XP operating system and may vary depending on your
version of Windows.
1.
After the software has been installed, PCI adapter installed and system started, a 'Found New Hardware' alert will
appear.
2.
The 'Found New Hardware Wizard' window will appear.
3.
The Wizard will ask to connect to the Windows Update server to locate the software. Choose 'No, not this time'
and click the 'Next' button to proceed.
4.
At the next prompt, choose 'Install the software automatically' and click 'Next' .
5.
The 'Hardware Wizard' will search for the proper drivers; however, it may be interrupted by a message stating that
the hardware has not passed Windows certification. Click on 'Continue Anyway' . All SeaCOM software and
drivers have been fully tested. Clicking 'Continue anyway' will not harm your system.
6.
The appropriate drivers for your version of Windows will be installed. Click 'Finish' to complete the installation of
your hardware.
7.
Note: The 'Found New Hardware' wizard will appear for the parent device and each serial port being installed – 17
times on the IC984C.
8.
When the 'Found New Hardware Wizard' appears again, repeat steps 2-6.
After all ports have been installed successfully, your hardware is now ready for use. You can proceed with verifying the
installation, if necessary.
CHAPTER
11

Advertisement

Table of Contents
loading

Table of Contents