Configuration - Black Box Async 232 422/530 Manual

This section describes the location and orientation of the Async
232↔422/530 Card's configuration jumpers, provides detailed instructions
on setting each jumper, and describes the settings for each of the rear
connection cards.
The Async 232↔422/530 Card uses two jumpers that allow configuration to a
wide range of asynchronous applications. These jumpers are accessible when
the card is slid out of the rack chassis. Once the hardware is configured, the
Async 232↔422/530 Card is designed to operate transparently, without need
for frequent re-configuration: Just set it and forget it.
Figure 3-1. Location of configuration jumpers

3. Configuration

Unit A
1
2
JP1
3
Unit B
1
2 JP2
3
on the Async 232↔422/530 Card.
CHAPTER 3: Configuration
10