Pc - Pc Direct Cable Connection: Via Rs232/V.24 Interface - Gigaset M101 Data Operating Instruction

16.4.99
Basis
Teilnehmer 2
PC
V.24-DECT
Gigaset 2
Gigaset
64 kbit/s

PC - PC direct cable connection: via RS232/V.24 interface

appendix.fm5
Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1
To switch from Gigaset 2 to 3, simply click Change station type
COM
on the Local Station tab.
Teilnehmer
1
PC
3 Basis
V.24-DECT
Gigaset 1
Gigaset
64 kbit/s
M101
Extension
Base
V.24
M101
The problem that often occurs withPC - PC direct cable connec-
tions is incorrect baud rate setting. The following section de-
scribes how to configure a PC - PC direct cable connection at a
1
Win95 system.
Before using the actual Gigaset M101 Data, application function-
ality should be checked using a null-modem cable
erates fault detection and clearance. If this is not possible, the
precise configuration should be observed.
Gigaset M101 Data can be set to a fixed baud rate (direct
connection 115,200 bps with HW handshake).
1 similarly for WIN98
2 after the test, remove the null-modem cable and use the cable
supplied
Tips & tricks, settings
V.24
PC with
configuration program
Switch
the connection
Base
by changing the
station type
Extension
Telefon
Anschluß
Modem
Analog
analog oder ISDN
Gigaset 3
V.24
Gigaset
2
. This accel-
25