Table of Contents
Advertisement
3.2
Installation of the spread width regulator
6.
Dismount the shackle on the spread apron, turn it 180° and refasten it.
Fig. 8 Spread apron
7.
Mount the electric cylinder.
Fig. 9 Hydraulic connections - spread width regulator
8.
Lay out the cable from the electric cylinder to the control device. You can fasten the
control device on any iron part in the cab, using the magnetic base.
3.3
Mounting and dismounting the combination device
Mount the two electric cylinders and the combination control device as described in chap.
3.1 and 3.2.
Shackle
Installation
Advertisement
Table of Contents
