Safety; Intended Use; General Safety Instructions - matev SPR-H/M 125 IX Original Operating Manual

Electronic spread rate and spread width control device
Table of Contents

Advertisement

2

Safety

Guidelines and instructions with which you must comply, are summarized in this section.
Personnel who mount, operate and maintain this implement, must have read and under-
stood this operating manual.
2.1

Intended use

This device is an electronic spread rate and spread width regulator for the type of matev
spreaders specified on the cover page and it is available for spread rate regulation,
spread width regulation, or as a combination device for regulation of spread rate as well
as spread width. The desired spread rate or spread width are set via separate potentiom-
eters on the control unit, The pushers, i.e. the spread apron are/is activated via electric
motors.
All other uses are excluded.
2.2

General safety instructions

General safety instructions are explained in this section. These safety instructions are
used in the subsequent chapters. In addition to the safety aspect, you will save money
and work time if you follow these safety instructions.
Danger!
Severe injury to the operator or third parties occurs.
Comply with the safety instruction.
Attention!
Minor injury to the operator or third parties can occur. The tractor, the im-
plement or the environment can be damaged.
Comply with the safety instruction.
Installation

Advertisement

Table of Contents
loading

Table of Contents