Warning; Connecting The Accessories - Clarion M502 Owner's Manual & Installation Manual

16-Pin Connector Extension Lead
(attached to the source unit)
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Purple
Rear Right
Purple/Black
Green
Red wire (Power lead)
Rear Left
Green/Black
4-Speaker system
Blue/White wire (Amplifier turn-on lead)
or
2-Speaker system
Black wire (Ground lead)
Gray
Front Right
Gray/Black
Orange/White wire (Illumination lead)
White
Front Left
White/Black
Purple
Blue wire (Auto antenna lead)
Purple/Black
Green
Not used.
Green/Black
Insulate each wire

8) Connecting the accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Yellow wire (Memory back-up lead)
Connect directly to battery
Accessory 12V
Connect to remote turn-on lead of amplifier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna

9. WARNING

-English:"
This device complies with industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interrence, and
(2) this device must accept any interference, including interference that may cause undersired
operation of the device."
-French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicablestechnicien aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.»
16
M502