Advertisement
TRANSPORTING THE SYSTEM
IMPORTANT!
TO PROTECT THE TURNTABLE FORM THE DAMAGE DURING TRANSPORTATION, A SLIVER
TRANSIT SCREW IS LOCATED THE UPPER RIGHT THE TURNTABLE PLATFORM.
- BEFORE PLAYING. PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT SCREW IN
CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO UNLOCK THE
TURNTBALE.
- TO LOCK THE TURNTABLE AGAIN FOR TRANSPORTATION, PLEASE TURN SCREW IN
COUNTER- CLOCKWISE DIRECTION.
CARE OF THE LEATHER CASE
-
CARE OF THE UNIT IS THE SAME AS ANY PIECE OF FURNITURE.
- WHEN THE UNIT IS DUSTY, YOU MAY WIPE IT USING SOFT, NON-ABRASIVE
DUST CLOTH.
E-11
CARE AND MAINTENANCE
TO REPLACE THE CARTRIDGE FROM THE TONE ARM PLEASE FOLLOW THE
PROCEDUCE BELOW.
- GENTLY LIFT OFF THE TONE ARM FROM
THE TONE ARM REST.
- BY USING YOUR LEFT HAND TO HOLD
THE TONE ARM AND USING YOUR RIGHT
HAND TO HOLD THE REAR PORTION OF
THE CARTRIDGE. THEN PUSH THE
CARTRIDGE BACKWARDS AND
DOWNWARDS ACCORDING TO THE
DIRECTION AS SHOWN TO THE LEFT TO
SEPARATE THE CARTRIDGE FROM THE
TONE ARM.
- USING EITHER A TWEEZER OR YOUR
FINGERS, CAREFULLY UNPLUG THE
TERMINALS TO THE NEW CARTRIDGE.
- CAREFULLY CONNECT THE TERMINALS
TO THE NEW CARTRIDGE
(NOT INCLUDED).
- TO RE-INSTALL THE NEW CARTRIDGE TO
THE TONE ARM. FIRST PLEASE LOCK THE
FRONT END OG THE NEW CARTRIDGE
ON THE HOOK OF THE TONE ARM.
- PRESS THE REAR SIDE OG THE NEW
CARTRIDGE UPWARDS TO LOCK IT ON
THE TO THE TONE ARM.
CAUTON: PLEASE DON'T DAMAGE THE STYLUS WHEN INSTALLING THE NEW CARTRIDGE.
E-12
Advertisement
