Advertisement
TURNTABLE PANEL
VOLUME
TURNTABLE
45 RPM
CONTROL
ADAPTOR
BACK PANEL
HEADPHONE
LINE OUT R
3.5mm AUX-IN Jack
E-5
TRANSIT SCREW
CROSSING
LIFT LEVER
TONE ARM LOCK
SPEED SELECTOR
(33/45/78 RPM)
TONE ARM WITH
STYLUS
DC INPUT Socket
LINE OUT L
UNPACKING AND SET UP
- CAREFULLY REMOVE THE UNIT FROM THE DISPLAY CARTON AND REMOVE
ALL PACKING MATERIAL FROM THE UNIT.
- UNWIND THE AC ADAPTOR JACK CABLE AND EXTEND IT TO ITS FULL LENGTH.
- PLACE THE UNIT ON A STABLE, LEVEL SURFACE, CONVENIENT TO AN AC
OUTLET OUT OF A STRONG MAGNETIC FIELD.
- CONNECT THE AC ADAPTOR PLUG TO YOUR AC OUTLET.
- REMOVE THE OPAQUE WHITE PLASTIC STYLUS
COVER FROM THE PHONOGRAPH STYLUS BY
SLIDING IT IN THE DIRECTION OF THE ARROW.
- DURING THIS OPERATION PAY ATTENTION TO THE STYLUS, BECAUSE THE
STYLUS DAMAGE IS NOT COVERED BY GUARANTEE.
- REMOVE THE TWIST-TIE THAT WAS USED TO SECURE THE TONE ARM
DURING THE SHIPMENT.
- RELEASE THE TONE ARM LOCK LEVEL.
POWERING ON THE UNIT
- CONNECT THE AC ADAPTER TO THE DC INPUT SOCKET ON THE BACK OF
THE UNIT. THEN THE STANDBY/ON INDICATOR WILL LIGHT ON, NOW THE
UNIT ON "STANDBY" MODE.
- PRESS STANDBY/ON BUTTON. THE DESIRED PLAYING SOURCE INDICATOR
WILL LIGHT ON.
- WHEN YOU HAVE FINISHED USING THE SYSTEM, PRESS STANDBY/ON BUTTON
AGAIN, TURN OFF THE UNIT WITH VOICE MESSAGE: POWER OFF.
E-6
Advertisement
