Vesa-Ddc-Compatible Vga Interface; Supported Modes - Siemens 43B1-M User Manual

Colour monitor 43B1-M

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
If the monitor 43B1-M is not yet displayed in the list of monitors, you can select the
i
following monitor instead:
C383 FA or 3814 FA

Supported modes

The display position and scanning are set to optimum values automatically for the
i
operating modes listed below. Depending on the screen controller used, it may be
necessary to adjust the display position and scanning. In this case, you can change and
save the settings (see "Operation of the monitor").
Screen resolution
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the
technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a
refresh rate of 60 Hz.
From a technical point of view, it is preferable to set a refresh rate of above 60 Hz on an
i
LCD monitor with a TFT display.
16 - English
Refresh rate
70 Hz
60 Hz
66.6 Hz
75 Hz
60 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
74.9 Hz
60 Hz
75 Hz
Horizontal frequency
31.47 kHz
31.47 kHz
35.00 kHz
37.50 kHz
37.88 kHz
46.88 kHz
49.73 kHz
48.36 kHz
56.48 kHz
60.02 kHz
60.24 kHz
63.98 kHz
79.98 kHz
A26361-K883-Z100-1-5E19