Wiring The Module - Allen-Bradley B Series User Manual

Chapter 3
Installation and Wiring

Wiring the Module

3–4
Figure 3.1
Installing the Module into the I/O Chassis
The module contains a green, 18-position, removable terminal block.
(Terminal Block Spare Part Catalog Number 1746-RT32)
CJC A+
CJC Assembly
CJC A–
Do NOT
use these
connections
See Figure 3.2
CJC B–
CJC Assembly
CJC B+
Release Screw
ATTENTION: Disconnect power to the SLC before
attempting to install, remove, or wire the terminal block.
!
Card
Guides
Top and Bottom
Releases
Release Screw
Channel 0+
Channel 0–
Channel 1+
Channel 1–
Channel 2+
Channel 2–
Channel 3+
Channel 3–
Do not connect
n/c
to this terminal
Publication 1746-6.16 – January 1999