Power Saving Control (Psc); Figure 12: Power Saving Control (Psc) - Siemens Mux_guide_v06 User Manual

Multiplexer User's Guide
Confidential / Released

4.3.10 Power saving control (PSC)

The power saving control message uses the following type field octet:
Type:
Bit 1 Bit 2
1 C/R
C/R bit: Indicates whether the sequence is a command or a response.
Length: The length byte contains the value 0 (no value octet) or 1 (one value octet).
Value octet (Length=1)
Bit 1 Bit 2
P1 P2
The P-bits are defining the parameter value.
In commands:
Bit 1 Bit 2
0 0
1 0
0 1
1 1
0 0
1 0
0 1
1 1
0 0
All wake up events and details of the CYCLIC and NON-CYCLIC SLEEP mode are specified
in [2].
In responses:
Bit 1 Bit 2
0 0
1 0
Mux_guide_v06
Bit 3 Bit 4 Bit 5
0 0 0

Figure 12: Power Saving Control (PSC)

Bit 3 Bit 4
P3 P4
Bit 3 Bit 4
0 0
0 0
0 0
0 0
1 0
1 0
1 0
1 0
0 1
Bit 3 Bit 4
0 0
0 0
Page 30 of 36
Bit 6 Bit 7
0 1
Bit 5 Bit 6
0 0
Description
Switches to the same mode as without a
value octet
Switches into full functionality mode, like
AT+CFUN=1
Switches into NON-CYCLIC SLEEP mode,
like AT+CFUN=0
Switches into CYCLIC SLEEP mode, like
AT+CFUN=5
Switches into CYCLIC SLEEP mode, like
AT+CFUN=6
Switches off, like AT^SMSO
Resets, like AT+CFUN=1,1
Switches into CYCLIC SLEEP mode, like
AT+CFUN=7
Switches into CYCLIC SLEEP mode, like
AT+CFUN=8
Description
Failure
Success
s
m
o b i l e
Bit 8
0
Bit 7 Bit 8
0 0
30.06.2004