Data Services - Siemens M75 User Manual

90 Setup
• Not visible
Your phone is not "visible" to other
BT devices. Known devices such as
Bluetooth-Headset/Car Kit continue
operating.
• Auto mode
Your phone is "visible" to other BT
devices for several minutes. You will
then be asked if "visibility" should
continue.
Shown in the display
Bluetooth activated.
¨
Bluetooth visible to others.
©
Bluetooth during data transfer.
ª
Call to Bluetooth device
accepted.
«

Data services

Basic setting and activation of the
connection profiles for data trans-
mission such as
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the provider.
You can start immediately.
• Access profiles have already been
created by your provider. Then
select and activate profile.
• The access profiles must be con-
figured manually.
MMS, WAP.
If necessary, check with your service
provider for details. You will also find
the current settings for the service
provider on the Internet at
www.siemens.com/
mobilephonescustomercare
in the FAQ section.
Select profile
Select the profile.
I
Confirm selection.
C
Set profile
Select the profile.
I
§Options§
Open menu.
Open the selection.
§Edit§
Select
GPRS
I
Make the settings as
§Edit§
specified by your service
provider.
CSD settings, and/or
settings.