Data Services - Siemens SL55 User Manual

78
§Menu§
KmK
Select function.
K

Data services

For the
MMS, Wap
applications at least one connection
profile must be set up and activated.
Select profile.
G
Open menu.
§Options§
Change sett.
Select, then:
For CSD (Circuit Switched Data)
CSD settings
Select.
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
Press.
§Edit§
Dial-up
Enter ISP number.
number
Call type:
Select ISDN or ana-
logue.
Login name:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
Save settings.
§Save§
m Setup
Connectivity
and
Mail,Java,Rms
For GPRS
(General Packet Radio Service)
GPRS settings
Select.
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone
(p. 77).
Press.
§Edit§
APN:
Enter service provider
address.
Login name:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
Save settings.
§Save§
HTTP profile
Preparation of the phone depends
on current service provider:
• The settings have already been in-
stalled by your provider. You can
start immediately.
• Access profiles have already been
set by your provider. Then select
and activate profile.
• The access profiles must be set
manually.
If necessary, check with your service
provider for details.