Sim Card; Phone Setup - Siemens M30 User Manual

36

Phone setup

reference in which your phone
First
should select a network.
Enter the setup menu
by pressing »MENU«
Manual selection Your phone will
Select »Phone setup«
always start searching for the net-
work with which it was in contact
Language when it was switched off. If the
phone cannot locate this network,
Select »Language« to change the
it will present some alternative net-
display language of your phone.
works on the display, and you must
then select one manually.
Network selection
Set preferred list Enter a list of net-
Phoning abroad requires the use of
works in your own order of pre-
a foreign network. You can select
ference and store them on your
one manually or let your telephone

SIM card.

do it automatically.
To do this, select the empty loca-
Entering »Network selection«
tion in which you want to store the
gives you three options:
new network. Pressing »EDIT « will
give you a list of networks. Find a
Automatic selection Let your phone
find an available network automati- network you wish to store in your
cally. Your phone will always try to preferred list, and press »OK«. If
reach your home network first, you select a currently used location
then alternatively find another avail- and press »EDIT«, the former occu-
able network. You have the possibil- pant will be deleted if you enter a
ity of establishing a preferred list new one.
(see below) indicating the order of
Setup menu
Tones
The Tones menu gives you different
options for the various tones of
your phone:
Ringing tone Choose between 10
different ringing tones.
Ringing volume Select whether you
want the volume of your ringing
tone to be »High«, »Medium«,
»Low« or »Off«.
Facts & Tips
• If, by mistake, you select a language
SMS tone volume Select whether
which you do not understand, you can
you want to be alerted by a tone
always return to the original language
when you receive an SMS. Your
by pressing the following keys:
options are »High«, »Medium«,
0000 , in standby mode.
»Low« or »Off«.
• If you want to store a network that
is not present in the list you get when
Broadcast tone volume Select
you press »EDIT« , you can select
whether you want to be alerted by
»Specify« and enter the country
a tone when you receive a broad-
code and network number of the net-
cast message. Your options are
work.
»High«, »Medium«, »Low« or
»Off«.
• Please note that your phone can get
in contact only with co-operating net-
works (except for emergency calls).
Setup menu
Key tone Select whether you want
to hear a tone when you press a
key on your keypad. Your options
are »On« and »Off«.
37
Facts & Tips
• Remember that for each entry
stored in your phone book you can
select a specific ringing tone (p. 12).
The ringing tone pattern that you
select in »Tones« will thus be used
for the callers to which you have not
selected a specific ringing tone.
• You can disable all kinds of tones by
pressing »MENU« and then . Just
press the same keys again in the
same order to revert to your original
settings.