Siemens M30 User Manual page 21

Siemens mobile phone user guide
Table of Contents

Advertisement

38
Phone setup
First
Speed dialling Activate »Speed
dialling« to make it possible to call
Enter the setup menu
any numbers in your phone book
by pressing »MENU«
just by using the location number.
Select »Phone setup«
Press the location number for one
second, and the call will be initiated
Dial mode
automatically. If the location num-
ber consists of more than 1 digit,
Dial mode allows you to choose
press the first digit(s) and hold the
between the following two fea-
last digit for one second.
tures. These two features cannot
be active at the same time, and
Text dialling Activate »Text dialling«
selecting one of them will automat-
to set the phone in alpha mode.
ically deactivate the other:
This enables you to enter a USSD
with both letters and digits instead
of only digits. Remember that a
USSD must always be terminated
by pressing the # key and then
»CALL«.
Setup menu
Greeting
Factory settings
Make a welcome greeting on your
Select »Factory settings« and your
phone according to your own wish-
phone will automatically revert to
es. Delete the old greeting, if any,
its original setup:
by holding down »CLEAR«, enter
Watch:
the new greeting via the keypad
and confirm by pressing »OK«.
Language:
(This function may not be available
Network
on all networks).
selection:
Ringing tone:
Ringing
volume:
SMS tone
volume:
Broadcast tone
volume:
Key tone:
Dial mode:
Greeting:
Setup menu
24h mode
Automatic
Automatic
Standard
High
High
High
On
Speed dialling
None
39
Facts & Tips
• Read about location numbers in the
chapter about your phone book (p. 12)
USSD (Unstructured Supplemen-
tary Service Data) is a feature com-
pletely defined by your network allow-
ing direct communication between
you and your network. An example of
a USSD could be that entering a cer-
tain code of digits and/or letters termi-
nated by a
#
tells your network to
send you a scale of charges.
• The survey at p. 12 tells you how to
find the different characters on your
phone's keypad when you want to
write e.g. a USSD or a new welcome
greeting.

Advertisement

Table of Contents
loading

Table of Contents