Siemens M30 User Manual page 13

Siemens mobile phone user guide
Table of Contents

Advertisement

22
Messages
First
The SMS indicator
shown in the upper side of your
Enter the list menu
standby display as long as you have
by pressing
one or more unread messages.
Select »Messages«
• Immediate SMS
Your network might send you some
Messages
or all your SMS as immediate SMS.
The menu »Messages concerns
An immediate SMS will appear
SMS text messages which you can
directly in your display when
both send and receive, broadcast
received, and you can then select
messages that you can only receive
»VIEW« to read the SMS or
(from your network), and finally a
»CLEAR« to reject and delete it. An
voice mail function where you can
immediate SMS will not be auto-
listen to your voice mails.
matically stored, but if you select
Entering this menu thus gives
»VIEW«, you get the option of sav-
you the following features:
ing it by selecting »SAVE«.
Inbox The SMSs you receive are
Outbox If you choose to have out-
automatically stored under »Inbox.
going SMSs stored automatically,
Select the SMS and scroll through
you can find them again under
it by using the arrow keys.
»Outbox«. This requires that you
enter the Setup menu (42) and acti-
• Direct access to your inbox
vate »Save outgoing SMS«.
When you receive a new SMS the
symbol
appears in the middle
of your display, and you can get
direct access to your inbox simply
by pressing
.
List menu
Options with SMS
will be
In addition to reading an SMS in
your inbox and outbox, you can
select the SMS, press »OPTION«
and:
• delete it
• send a reply (only in inbox)
• forward it to another phone
number
• edit it before sending it (again)
• call the sender (only in inbox).
List menu
New SMS If you want to send a
If these parameters have not been
new SMS:
specified, you should enter the
Setup menu (p. 41) to do so once
Once you have selected »New
and for all – otherwise you will be
SMS« you can start entering
asked for a specification each time
your message using the keypad
you wish to send a message.
in the same way as you enter a
name in the phone book (p. 12).
End your SMS by pressing
»OK«.
Select »Send SMS« by press-
ing »OK«.
Enter the phone number you
want to send the SMS to or
select one from your phone
book using
.
Press »SEND« to send your
message.
To send an SMS, certain parame-
ters have to be specified (name
and number of service centre,
validity time for the SMS). On most
SIM cards these specifications
have already been made by the
network operator.
23
Facts & Tips
• Read about the message tones in
the Setup menu p. 37.
• You can always see if a received
SMS has been read or not. If the
SMS is unread, the SMS indicator
is displayed above the message.
• If the SMS indicator
is flashing,
it indicates that the SMS memory is
full. You will then have to delete some
or all of your SMS.
• When you have entered a new SMS
»OK«
and accepted by pressing
you
can also choose to save it and send it
later on. Saved SMSs will be stored in
»Outbox«.
• If while writing an SMS you are
interrupted by a call, your SMS will be
automatically stored in
»Outbox«.

Advertisement

Table of Contents
loading

Table of Contents