Connector Sim Card Reader - Siemens SL65 Service Repair Documentation

Company Confidential
Copyright 2004© Siemens AG

2 Connector SIM Card Reader

Fault Symptoms
Customer:
Handset does not accept SIM card
not okay
Exchange
SIM Card reader
Connector SIM Card Reader
Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!
Resolder new component afterwards.
E-commerce order number:
Soldering temperature:
IRIS Diagnose Code:
Service Repair Documentation
Level 2.5 - SL65
SIM Card Problems
Watch for oxidation and
damaged pads of the SIM
card reader
okay
Check the status of the
SIM card reader visually
okay
Use the resistor test
function of a multimeter
to check connection
not okay
between spring
contacts and soldering
contacts. The value
must be ~0Ω
L36334-Z97-C335
240 - 255°C
43300 Interface/SIM Cardreader/Mechanical Damage
Page
GRT:
SIM Card Problems
not okay
okay
of
5 10
SCRAP
don´t
WSC
send back to
- check for twisted or
bended contacts
- check for dry joints
Level 2 Repair