Table of Contents
Advertisement
Conference
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been
established:
Open menu and select
§Options§
Hold. The current connec-
tion is maintained.
Now dial a new number.
When the new connec-
J
tion is established ...
... open menu and select
§Options§
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together
(up to 5 participants).
End
All calls in the multiparty
conversation are ended
B
when the End key is
pressed.
Call options
b
The following functions are only
available during a call:
§Options§
Hold
Microphone
on
Handsfree
Volume
Default book
Conference
Time/charge
Send DTMF
Call
transfer
Main menu
Call status
Calling
Open menu.
Hold current call.
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also:
Press and hold.
*
Call via the loudspeaker.
Adjust handset volume.
Display Phone-
book/Addressbook.
(See p. 29)
Display talktime that has
elapsed so far and (if set)
cost incurred during the
call.
Enter control codes (num-
bers) for remote inquiries
to an answering machine.
Connect the original call
with a second call. For you,
=
both calls are now ended.
Access to the main menu.
List all held and active calls
(e.g. participants in a con-
ference).
29
Advertisement
Table of Contents
