Siemens A52 User Manual page 66

Question
Message cannot
be sent.
EMS pictures &
sounds are not dis-
played at the destina-
tion phone
PIN error / PIN2 error. Three wrong entries.
Phone code error.
Service provider code
error.
Too few/too many
menu entries.
Charge counter does
not work.
Damage
Severe shock.
Phone became wet.
Reset settings to the factory default (p. 51):
Questions&Answers
Possible causes
Some service providers do not sup-
port this service.
Phone number of the service centre
is not set or is wrong.
SIM card contract does not support
this service.
Service centre overloaded.
Recipient does not have a com-
patible phone.
The destination phone does not sup-
port the EMS standard.
Three wrong entries.
No authorisation for this service.
Functions may have been added or
removed by your service provider via
the SIM card.
Charge pulse not transmitted.
Remove battery and SIM and insert them again. Do not dismantle phone!
Remove battery and SIM card. Dry immediately with cloth, do not heat. Dry con-
nector contacts thoroughly. Stand unit upright in an air current. Do not dismantle
phone!
Possible solution
Check with your service provider.
Set service centre (p. 37).
Contact your service provider.
Repeat message.
Check.
Enter the PUK (MASTER PIN) provided
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, contact your service provider.
Contact Siemens Service (p. 66).
Contact your service provider.
Check with your service provider.
Contact your service provider.
A
*
# 9 9 9 9 #
65