Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rosin Tech Big Smash
Summary of Contents for Rosin Tech Big Smash
- Page 1 Rosin Tech Big Smash ™ Owner’s Manual...
-
Page 2: Getting Started
Getting Started Follow this step-by-step guide for how to set your temperature and length of press. Remember to start with a small batch for testing until you lock in your optimal temperature and length of press. Electrical Specification 110 Volts 600 Watts 5 Amps... -
Page 3: Step 1: Plug In / Turn On
STEP 1: PLUG IN / TURN ON ● Once you’ve plugged in your press, and flipped on the power, both LCD screens will light up and plates will begin heating! TIP #1: Please note the digital controller on top will control the top heating plate as well as the timer for length of pressing. -
Page 4: Step 2: Enter Settings Mode
STEP 2: ENTER SETTINGS MODE Press the “SET” button one time. You are now in the ‘edit settings’ mode. * TIP #2: SP = Temperature Mode... -
Page 5: Step 3: Adjust Temperature
STEP 3: ADJUST TEMPERATURE Press the up and down arrows to increase or decrease the temperature of the plates. ● Once you have found your desired temperature, press the set button to change from ● SP to ST. * TIP #3: Default setting is to Fahrenheit. -
Page 6: Step 4: Adjust Length Of Press
STEP 4: ADJUST LENGTH OF PRESS ● Now the screen shows ST. Press the up and down arrows to increase or decrease the timer set for each press. Once you have found your desired time, press the set button until you return back to ●... - Page 7 STEP 5: LET PLATES HEAT UP Once you have found your desired time, press the set button until you return back to ● “Normal Mode”, seen below. Now that you’ve set your temperature and length of press, its time to let both heating ●...
- Page 8 SET FAHRENHEIT° TO CELSIUS° ● Hold set button, until you see C-F to change the display from Fahrenheit (F°) to Celsius (C°). Use up and down arrows to switch from Fahrenheit to Celsius ● Hold set again to leave settings and return to normal mode ●...
-
Page 9: Additional Questions
Additional Questions? Shoot an email to support@rosintechproducts.com Follow us on Instagram @rosin.tech.products. Appreciate any shoutouts very much. If you tag us in a picture using your new press and we will repost on our profile. Enjoy ☺...
Need help?
Do you have a question about the Big Smash and is the answer not in the manual?
Questions and answers