Initialize (Initialize) - Fujitsu CG-641 Series Operation Manual

(8)

Initialize (INITIALIZE)

This returns all settings to the initial factory settings.
INITIALIZE
ALL SETTINGS ARE
IINITIALIZED
OK CANCEL
Figure 14 INITIALIZE menu
Operating procedure
1. Move the cursor to "INITIALIZE" and press the switch to display the "INITIALIZE" screen.
2. Move the cursor to "OK" and press the switch to run initialization.
3. This automatically returns to the "MAIN MENU" when initialization is complete.
Note) The following settings won't be reset with this initialization.
Setting value of "ADDRESS" and "COM SPEED" from the "CAMERA SETUP" menu
"PHASE" phase adjustment value of "SYNC SELECT" from "FUNCTION SET." menu
BLEMISH COMPENSATION value after running the "BLEMISH COMPENSATION"
Setting details are shown when initialize is running.
EXPOSURE SET.
→ NORMAL
AE MODE
→
ECLIPSER
→
(LEVEL)
→
(GRAY)
→
VIDEO LEVEL
→
FLICKERLESS
→
AGC
→
SENS UP
→ ( AUTO )
DAY&NIGHT
→
(DETECT TIME)
→ ( 10min )
(FILTER LIMIT)
RETURN
CAMERA SETUP
ADDRESS →
COM SPEED → 4800
L. SETUP JUMP → ON
RETURN
Figure 15 Setting details for INITIALIZE
FUNCTION SET.
SYNC SELECT
WHITE BALANCE
( OFF )
( LOW ) CHROMA
( OFF ) GAMMA
APERTURE
-2
OFF CABLE COMPEN.
MASKING
LOW
4 TITLE
( 5sec ) RETURN
END
CHROMA
RY GAIN
1
BY GAIN
RY HUE
BY HUE
RETURN
END
→ (AUTO)
→ AUTO
→
→ CRT/PDP
→ -1
→ SHORT
→ (OFF)
→ (OFF)
END
→ 1
→ 1
→ 0
→ -2
END
En-22