Download
Share
Print this page
Fujitsu CG-531 Series Instruction Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Security Camera
  5. CG-531 Series
  6. Instruction manual
Fujitsu CG-531 Series Instruction Manual

Fujitsu CG-531 Series Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
CCD CAMERA
CG-531 Series

Advertisement

loading

Related Manuals for Fujitsu CG-531 Series

Summary of Contents for Fujitsu CG-531 Series

  • Page 1 INSTRUCTION MANUAL CCD CAMERA CG-531 Series...
  • Page 2 WARNING – TO PREVENT RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE. PRECAUTION : DO NOT REMOVE ANY COVER WHILE THE CAMERA IS OPERATING. PAL : USE ONLY RECOMMENDED POWER SUPPLY, 24 VAC (20.4 to 27.6 VAC) 50 Hz or 12VDC(10.2 to13.8VDC).

  • Page 3: Table Of Contents

    CONTENTS Section Page IMPORTANT SAFEGUARDS INTRODUCTION CAUTIONS FOR OPERATION EXTERNAL CONTROLS AND CONNECTORS LENS ELECTRONIC CONNECTIONS MECHANICAL CONNECTION BACK FOCAL ADJUSTMENT POWER CONNECTION AC POWER CONNECTION DC POWER CONNECTION SETUP MENU SETTING METHOD SETTING OPERATION SETUP ITEMS MODE SELECT EXPOSURE SET. FUNCTION SET.

  • Page 4: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions–All the safety and operating instructions should be read before the camera is operated. 2. Retain Instructions–The safety and operating instructions should be retained for future reference. 3. Heed Warnings–All warnings on the camera and in the operating instructions should be adhered 4.
  • Page 5 14. Overloading–Do not overload wall outlet and extension cord, as this can result in a risk of fire or electric shock. 15. Object and Liquid Entry–Never push objects of any kind into the camera through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the camera.

  • Page 6: Introduction

    INTRODUCTION Thank you for purchasing this product. This product is a multiple function and a high quality CCD camera developed considering a high-end security. The following functions are built-in: (1) On Screen Display function (2) High Quality picture (3) Small Size CAUTIONS FOR OPERATION Do not touch the photoconductive surface of the CCD imager element.

  • Page 7: External Controls And Connectors

    EXTERNAL CONTROLS AND CONNECTORS TOP/FROMT VIEW BACK VIEW Fig.1 Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera. ! Back Focus Lock Screw Loosen to adjust the back focus to match the lens attached to the CS mount.

  • Page 8: Lens

    LENS This camera can accommodate Video signal control and DC voltage drive auto-iris lens. ELECTRONIC CONNECTIONS T able.1 shows wiring scheme for the 4pin Auto iris connector. CAUTION: The output power for auto-iris lens is +9VDC and the maximum current capacity is 40mA. When using an auto-iris lens requiring voltage and current other then specified, supply lens power only from an external power supply.

  • Page 9: Back Focal Adjustment

    BACK FOCAL LENGTH ADJUSTMENT The camera has been factory-adjusted for the proper back focal length using a standard CS Mount lens. However, when the lens is mounted, it may be necessary to readjust back focal length to match the lens being used. ALLEN W RENCH 10mm 50mm...

  • Page 10: Power Connection

    POWER CONNECTION This camera uses 24VAC or 12VDC power supply for the main supply. CAUTION : Take care not to short-circuit the power line wire, when connecting the power-supply cord to the camera. AC POWER CONNECTION A main supply of 24VAC (20.4 to 27.6 VAC) 50 / 60Hz is required. This main supply must also have a minimum rating of 270mA.

  • Page 11: Setup Menu

    SETUP MENU This product built in OSD function and can customize the camera setting. The menu list is shown in the following. MODE SELECT STANDARD CASINO USER MODE RETURN EXPOSURE SET. MAIN MENU NEXT PAGE AE MODE MODE SELECT ECLIPSER EXPOSURE SET.
  • Page 12 ECLIPSER ECLIPSER THRESHOLD LEVEL RETURN SYNC SELECT SYNC MODE AUTO *Only when AUTO is selected PHASE VALUE RETURN CHROMA CHROMA GAIN RY HUE BY HUE RETURN MASK SETTING MASKING SELECT START POSITION MASK MASK COLOR BLACK MASK EDIT MASK ERASE NOW POINT = ( 088 , 051 ) RETURN *Only when ON is selected for MASK...

  • Page 13: Setting Method

    SETTING METHOD This camera has multiple functions, and can be adapted to a shooting place. The method of setting the function of the camera is the following. (1) Setting method by using OSD(On-screen Display) function. Refer to the next section in details. The SW which is described to the following sentence shows Fig.1 ⑥.

  • Page 14: Setting Operation

    SETTING OPERATION This camera has OSD function. T o change settings on the menu, operate the following procedure. 1. Press and hold down the SW for 2 seconds or mo re. The SW on the rear panel is used. (Fig.1 ) 2.
  • Page 15 Parameters of each mode is shown in Fig.7-7,7-8. STANDARD FUNCTION SET. EXPOSURE SET. SYNC SELECT AE MODE AUTO WHITE BALANCE ECLIPSER AUTO CROMA DC IRIS LEVEL FLICKERLESS GAMMA 0 . 6 APERTURE SHARP CABLE COMPENSATION SHORT MASKING TITLE RETURN RETURN Fig.

  • Page 16: Exposure Set

    (2) EXPOSURE SET . In this menu, the exposure system of the camera can be specified. EXPOSURE SET . AE MODE ECLIPSER DC IRIS LEVEL FLICKERLESS RETURN Fig. 8-1 EXPOSURE SET . menu AE MODE AE operation mode can be selected. NORMAL BLC+ESC The mode turns in this order.

  • Page 17: Function Set

    (2-1) ECLIPSER The ECLIPSER function is set. ECLIPSER ECLIPSER THRESHOLD LEVEL RETURN Fig.8-2 ECLIPSER menu ECLIPSER Select one of the following Eclipser options: ON When using Eclipser settings. OFF When not using Eclipser settings. (Factory setup is OFF .) THRESHOLD The threshold of the brightness of the corrected subject can be adjusted..
  • Page 18 (3-1) SYNC SELECT This camera supports the synchronization mode such as line lock and internal. SYNC SELECT SYNC MODE AUTO PHASE VALUE RETURN Fig.9-3 SYNC SELECT menu SYNC MODE The synchronization mode can be selected. AUTO : At AC power supply, this mode allows the camera to use the phase of the AC power as the reference.
  • Page 19 (3-2) WHITE BALANCE WHITE BALANCE Y ou can select one of 4 modes for white balance adjustment as follows. AUTO, HOLD, INDOOR (Approx. 3200K) AUTO : The white balance is adjusted automatically to provide the optimum picture. HOLD : In this mode, the WB gain just before changing to this mode is kept. INDOOR: These modes are the fixed WB gain.
  • Page 20 (3-6) CABLE COMPENSATION Cable compensation mode can be selected. SHORT MIDDLE LONG The mode turns in this order. -> -> (Factory setup is SHORT) SHORT: From 0 to 100 meters the length of the cable MIDDLE: From 100 to 300 meters the length of the cable LONG: From 300 to 500 meters the length of the cable These modes adjust the output in proportion to the length of the cable.
  • Page 21 (3-8) TITLE You can assign a name to the camera, and display on the monitor. TITLE TITLE EDIT TITLE ABCDEFGHIJKLM TITLE EDIT NOPQRSTUVWXYZ abcdefghijklm nopqrstuvwxyz 0123456789-/ RETURN RETURN Fig.9-7 TITLE menu TITLE The title display can be switched ON or OFF on the monitor screen. TITLE EDIT The display character can be edited.

  • Page 22: Mode Save

    (4) MODE SAVE Current settings can be saved. Saved settings can read by selecting USER MODE of MODE SELECT . MODE SAVE CURRENT SETTINGS ARE SAVED. CANCEL Fig.12 MODE SAVE menu Operation procedure 1. After changing parameters and adjustments, move the cursor to MODE SAVE and press the SW. MODE SAVE menu is displayed.

  • Page 23: Initialize

    (6) INITIALIZE Present settings are reset to the factory default settings. INITIALIZE ALL SETTINGS ARE IINITIALIZED Fig. 8 INITIALIZE MENU CANCEL Fig.14 INITIALIZE menu Operation procedure 1. Move the cursor to INITIALIZE and press the SW. INITIALIZE menu is displayed. 2.

  • Page 24: Firmware Version

    (7) FIRMWARE VERSION Select this option to display the camera firmware information FIRMWARE VERSION FIRMWARE VERSION #. ## ODD VERSION #. ## RETURN Fig.16 FIRMWARE VERSION menu En-23...

  • Page 25: Specifications

    SPECIFICATIONS Model Name CG-531 TV System NTSC Power AC24V (±15%) 60Hz/ DC12V (±15%) AC24V (±15%) 50Hz/ DC12V (±15%) Power Consumption 270mA(24VAC) / 390mA(12VDC) Imager 1/3" Interline transfer CCD Picture Elements (active) Approx. 380K pixels Approx. 440K pixels Synchronization Internal / Line Lock Signal to Noise Ratio 48dB(AGC off, weighting) Video Output...
  • Page 26 FUJITSU GENERAL LIMITED 1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan...