Fujitsu CG-641 Series Operation Manual page 18

(3-2) WHITE BALANCE
WHITE BALANCE
The mode for white balance can be selected.
AUTO: White balance is adjusted automatically.
HOLD: The white balance used right before changing to this mode is maintained. This is
suitable for imaging in a location where lighting doesn't change. Refer to the
following setting method.
White balance maintained using the "HOLD" mode is lost if it is switched to the
"AUTO" mode.
Method for the HOLD setting
1. "WHITE BALANCE" is set to "AUTO" in the condition that the object is captured.
2. "WHITE BALANCE" is switched "AUTO HOLD".
In this process, the white balance is maintained.
INDOOR : Fixed white balance for lighting of approximately 2800 K.
OUTDOOR : Fixed white balance for lighting of approximately 6000 K.
(3-3) CHROMA
The gain and hue of the chroma signal can be adjusted.
CHROMA
RY GAIN → 1
BY GAIN → 1
RY HUE → 0
BY HUE → -2
RETURN
Figure 9-4 CHROMA menu
RY GAIN
This adjusts the gain of chroma signal. Adjustment range -5 ~ 5
BY GAIN
This adjusts the gain of chroma signal. Adjustment range -5 ~ 5
RY HUE
This adjusts the hue of chroma signal. Adjustment range -5 ~ 5
BY HUE
This adjusts the hue of chroma signal. Adjustment range -5 ~ 5
(3-4) GAMMA
GAMMA
This selects the gamma setting.
CRT/PDP (approx. 0.6), LCD (approx. 0.45), OFF(approx. 1.0)
(3-5) APERTURE
APERTURE
This sets edge enhancement. It sharpens the image in the "+" direction and softens the image
in the "-" direction.
Settings values; -5 to 5
En-17
END