Using The Smartcard Reader - Fujitsu PalmSecure ID Match Operating Manual

Using the SmartCard reader

Using the SmartCard reader

The card reader can read and write contact-based cards of type ISO 7816-4 (2) in the SmartCard
slot (1), and also RFID cards of type ISO 14443A (3) via the sensitive placement area (4).
Depending on the variant of SmartCard reader that was ordered, cards of type Mifare Classic and
Desfire are also supported.
The SmartCard slot (1) for the contact-based cards is indicated by yellow LEDs. The RFID card must
be placed sideways on the sensitive placement area (4).
► Insert the contact-based card (2) into the SmartCard slot (1) in the direction of the arrow.
Or
► Lay the contact-free RFID card (3) in the sensitive placement area (4).
Only one reader can be used at a time.
i
The contact-based reader has priority.
24
2
1
3 4