Switching The Device Off - Fujitsu PalmSecure ID Match Operating Manual

Switching the device off

Depending on the operating system or application software, you can shut down the system
i
by command.
You will find information about this in the documentation for the operating system or the
application software.
If you shut down the device by pressing the On/Off switch for 4 seconds, this may lead to
loss of data.
► If the operating system does not automatically switch the device into power-saving mode or
switch it off, press the ON/OFF switch (1) on the bottom of the device for at least 4 seconds.
The device is switched off.
The ON/OFF switch does not disconnect the device from the mains voltage. To completely
i
disconnect from the mains voltage, you must remove the mains supply plug from the
mains supply socket.
Initial startup
1
21