Cleaning The Device; Ce Mark - Fujitsu PalmSecure ID Match Operating Manual

Table of Contents

Advertisement

Cleaning the device

.
Switch off the device and all equipment connected to it and remove the mains plug from the
mains supply socket.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or that may attack plastic (alcohol,
thinners or acetone).
Never wet-clean the device with water! Water entering into the device could present a serious
risk to users (e. g. electric shock).
Ensure that no liquid enters the inside of the device.
The display surface of the device is sensitive to pressure and scratches. Clean it only using a
soft, slightly moistened cloth.
The casing surfaces may be cleaned with a dry cloth. If particularly dirty, use a cloth that has
been moistened in mild domestic detergent and then carefully wrung out.

CE mark

The shipped version of this device complies with the requirements of the EC Directives: 1999/5/EC
"Radio and Telecommunication Terminal Equipment", as well as 2004/108/EC "Electromagnetic
Compatibility", 2006/95/EC "Low Voltage Directive", 2011/65/EU "RoHS Directive" and
2009/125/EC "Ecodesign Directive".
This device may be used in the following countries:
Belgium
Estonia
United Kingdom
Croatia
Luxembourg
Austria
Sweden
Spain
Cyprus
Please contact the appropriate government office in the particular country for current information on
possible operating restrictions. If your country is not included in the list, please contact the
appropriate supervisory authority to establish whether the use of this product is permitted in your
country.
Bulgaria
Finland
Rep. of Ireland
Latvia
Malta
Poland
Switzerland
Turkey
Denmark
France
Iceland
Liechtenstein
Netherlands
Portugal
Slovakia
Czech Republic
Important notes
Germany
Greece
Italy
Lithuania
Norway
Romania
Slovenia
Hungary
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents